Product Overview — Part 26337508
The 26337508 is a precision-manufactured BOMAG Scraper Parts component. The 26337508 rubber buffer is an industrial-grade impact absorption component for heavy construction equipment travel and swing end stops. This buffer absorbs kinetic energy at the end of machine travel range, preventing metal-to-metal impact that would cause structural damage and noise. The buffer uses a high-energy-absorption rubber compound with progressive deflection characteristics — low initial resistance for smooth engagement followed by increasing resistance as deflection increases, preventing hard end stop contact. This characteristic is critical for BOMAG compactor drum travel systems and heavy equipment swing mechanisms. Our BOMAG scraper parts catalog includes complementary buffer and isolation components. See 3128303930 and 450122 for related buffer specifications.
Technical Specifications
| Property | Value | Standard |
|---|---|---|
| Part Number | 26337508 | OEM Specification |
| Hardness | 45–70 Shore A (application specific) | ISO 48-4 / ASTM D2240 |
| Tensile Strength | ≥ 16 MPa | ISO 37 / ASTM D412 |
| Elongation at Break | ≥ 300% | ISO 37 / ASTM D412 |
| Compression Set | ≤ 25% (22h/70°C) | ISO 815-1 / ASTM D395 |
| Temperature Range | −40°C to +90°C | Operational limits |
| Ozone Resistance | No cracking 168h | ISO 1431-1 |
| Fire Safety | EN 45545-2 HL2/HL3 available | EN 45545-2:2013 |
| Fatigue Life | > 1,000,000 cycles | Dynamic fatigue protocol |
Applications
Heavy equipment travel end stops; swing system buffers; BOMAG compactor drum limit systems; industrial machinery impact absorbers.
Our technical team can assess suitability for other equipment types. Contact us with the make, model, and serial number for a precise cross-reference confirmation.
Material & Quality Standards
- Base Polymer: Natural Rubber (NR) or NR/SBR blend — excellent resilience and fatigue resistance
- Reinforcing Fillers: High-structure carbon black for controlled stiffness and wear resistance
- Protection Additives: Anti-ozonant wax and chemical antioxidant for extended outdoor service life
- Bonding System: Chemically bonded rubber-to-metal interface exceeding bulk rubber strength
- EN 45545-2 Option: Halogen-free flame retardant meeting smoke toxicity requirements (on request)
Every batch produced under ISO 9001:2015 QMS with full material traceability. Certificate of Conformance and material test reports available upon request.
Installation Guidelines
- Inspect on arrival: Verify part number 26337508. Check for transit damage — reject any non-conforming component.
- Clean mating surfaces: Remove all rust, old rubber fragments, grease, and paint before installation.
- Align correctly: Follow assembly drawing orientation. Incorrect orientation may cause premature failure.
- Torque fasteners: Use calibrated torque wrench and cross-pattern tightening sequence per OEM specification.
- Post-install check: Inspect for correct seating. Run equipment at low speed to verify no abnormal noise or vibration.