Product Overview — Part 3115 1822 01
The 3115 1822 01 is a precision-manufactured BOMAG Cab Mounts component. Part 3115 1822 01 is the Type-1 variant of the BOMAG cab isolation mount series, used on specific BW series configurations requiring alternative mounting geometry or rubber compound properties compared to part 3115 1822 00. This mount uses a natural rubber compound vulcanized to zinc-treated steel inserts under controlled temperature and pressure conditions. The vulcanization process creates a chemical bond between rubber and metal that is stronger than the rubber bulk — meaning the assembly will not delaminate under correct operational loads. The -01 suffix typically denotes a dimensional or compound variation. Our engineering team can confirm which variant is correct for your specific BOMAG model and serial number range. For broader BOMAG cab mount selection, the 3128 0458 series covers 15, 18, and 24 Shore A variants for different operator comfort priorities.
Technical Specifications
| Property | Value | Standard |
|---|---|---|
| Part Number | 3115 1822 01 | OEM Specification |
| Hardness | 45–70 Shore A (application specific) | ISO 48-4 / ASTM D2240 |
| Tensile Strength | ≥ 16 MPa | ISO 37 / ASTM D412 |
| Elongation at Break | ≥ 300% | ISO 37 / ASTM D412 |
| Compression Set | ≤ 25% (22h/70°C) | ISO 815-1 / ASTM D395 |
| Temperature Range | −40°C to +90°C | Operational limits |
| Ozone Resistance | No cracking 168h | ISO 1431-1 |
| Fire Safety | EN 45545-2 HL2/HL3 available | EN 45545-2:2013 |
| Fatigue Life | > 1,000,000 cycles | Dynamic fatigue protocol |
Applications
BOMAG BW series road compactors (specific configurations); BOMAG cab isolation systems requiring Type-1 mount.
Our technical team can assess suitability for other equipment types. Contact us with the make, model, and serial number for a precise cross-reference confirmation.
Material & Quality Standards
- Base Polymer: Natural Rubber (NR) or NR/SBR blend — excellent resilience and fatigue resistance
- Reinforcing Fillers: High-structure carbon black for controlled stiffness and wear resistance
- Protection Additives: Anti-ozonant wax and chemical antioxidant for extended outdoor service life
- Bonding System: Chemically bonded rubber-to-metal interface exceeding bulk rubber strength
- EN 45545-2 Option: Halogen-free flame retardant meeting smoke toxicity requirements (on request)
Every batch produced under ISO 9001:2015 QMS with full material traceability. Certificate of Conformance and material test reports available upon request.
Installation Guidelines
- Inspect on arrival: Verify part number 3115 1822 01. Check for transit damage — reject any non-conforming component.
- Clean mating surfaces: Remove all rust, old rubber fragments, grease, and paint before installation.
- Align correctly: Follow assembly drawing orientation. Incorrect orientation may cause premature failure.
- Torque fasteners: Use calibrated torque wrench and cross-pattern tightening sequence per OEM specification.
- Post-install check: Inspect for correct seating. Run equipment at low speed to verify no abnormal noise or vibration.