Product Overview — Part 354082
The 354082 is a precision-manufactured BOMAG Scraper Parts component. The 354082 is a precision-engineered rubber pad component for BOMAG scraper and compactor systems. Manufactured from premium compound rubber, this pad delivers reliable performance under the demanding vibratory conditions of road construction and earthmoving operations. Produced in our ISO 9001:2015 certified facility, part 354082 uses a high-resilience rubber compound specifically formulated for BOMAG BW series compactors. The compound provides excellent resistance to abrasion, ozone, and UV degradation, extending service life in outdoor construction environments. Every unit is dimensionally verified before shipment to customers in the United States, Canada, Europe, and globally. This rubber pad integrates with the BOMAG drum assembly to deliver controlled compaction force transfer while protecting the drum shell from wear. Correct rubber pad selection is critical for achieving optimal compaction density on road base, asphalt, and cohesive soil materials.
Technical Specifications
| Property | Value | Standard |
|---|---|---|
| Part Number | 354082 | OEM Specification |
| Hardness | 45–70 Shore A (application specific) | ISO 48-4 / ASTM D2240 |
| Tensile Strength | ≥ 16 MPa | ISO 37 / ASTM D412 |
| Elongation at Break | ≥ 300% | ISO 37 / ASTM D412 |
| Compression Set | ≤ 25% (22h/70°C) | ISO 815-1 / ASTM D395 |
| Temperature Range | −40°C to +90°C | Operational limits |
| Ozone Resistance | No cracking 168h | ISO 1431-1 |
| Fire Safety | EN 45545-2 HL2/HL3 available | EN 45545-2:2013 |
| Fatigue Life | > 1,000,000 cycles | Dynamic fatigue protocol |
Applications
BOMAG BW 120, BW 135, BW 177, BW 211, BW 226 series compactors; asphalt paver compaction applications; road base compaction.
Our technical team can assess suitability for other equipment types. Contact us with the make, model, and serial number for a precise cross-reference confirmation.
Material & Quality Standards
- Base Polymer: Natural Rubber (NR) or NR/SBR blend — excellent resilience and fatigue resistance
- Reinforcing Fillers: High-structure carbon black for controlled stiffness and wear resistance
- Protection Additives: Anti-ozonant wax and chemical antioxidant for extended outdoor service life
- Bonding System: Chemically bonded rubber-to-metal interface exceeding bulk rubber strength
- EN 45545-2 Option: Halogen-free flame retardant meeting smoke toxicity requirements (on request)
Every batch produced under ISO 9001:2015 QMS with full material traceability. Certificate of Conformance and material test reports available upon request.
Installation Guidelines
- Inspect on arrival: Verify part number 354082. Check for transit damage — reject any non-conforming component.
- Clean mating surfaces: Remove all rust, old rubber fragments, grease, and paint before installation.
- Align correctly: Follow assembly drawing orientation. Incorrect orientation may cause premature failure.
- Torque fasteners: Use calibrated torque wrench and cross-pattern tightening sequence per OEM specification.
- Post-install check: Inspect for correct seating. Run equipment at low speed to verify no abnormal noise or vibration.