Product Overview — Part 6180100
The 6180100 is a precision-manufactured Cab Mounts component. The 6180100 front cab support mount is an OEM cross-reference component providing both axial and radial load capacity at heavy equipment cab attachment points. This bonded rubber-to-metal assembly manages the complex loading conditions at front cab mount positions where road shock and tipping moments must be controlled simultaneously. Produced with premium natural rubber and zinc-treated steel inserts, part 6180100 delivers reliable performance across the temperature range of -40°C to +80°C encountered in North American construction operations from winter in Canada to summer in Texas. See our dedicated BOMAG cab mount range including part 3128259405 and the 3128 0458 series for BOMAG-specific front cab mounting solutions.
Technical Specifications
| Property | Value | Standard |
|---|---|---|
| Part Number | 6180100 | OEM Specification |
| Hardness | 45–70 Shore A (application specific) | ISO 48-4 / ASTM D2240 |
| Tensile Strength | ≥ 16 MPa | ISO 37 / ASTM D412 |
| Elongation at Break | ≥ 300% | ISO 37 / ASTM D412 |
| Compression Set | ≤ 25% (22h/70°C) | ISO 815-1 / ASTM D395 |
| Temperature Range | −40°C to +90°C | Operational limits |
| Ozone Resistance | No cracking 168h | ISO 1431-1 |
| Fire Safety | EN 45545-2 HL2/HL3 available | EN 45545-2:2013 |
| Fatigue Life | > 1,000,000 cycles | Dynamic fatigue protocol |
Applications
Heavy equipment front cab mounting; operator cab support at tipping moment points; front axle-connected cab attachments.
Our technical team can assess suitability for other equipment types. Contact us with the make, model, and serial number for a precise cross-reference confirmation.
Material & Quality Standards
- Base Polymer: Natural Rubber (NR) or NR/SBR blend — excellent resilience and fatigue resistance
- Reinforcing Fillers: High-structure carbon black for controlled stiffness and wear resistance
- Protection Additives: Anti-ozonant wax and chemical antioxidant for extended outdoor service life
- Bonding System: Chemically bonded rubber-to-metal interface exceeding bulk rubber strength
- EN 45545-2 Option: Halogen-free flame retardant meeting smoke toxicity requirements (on request)
Every batch produced under ISO 9001:2015 QMS with full material traceability. Certificate of Conformance and material test reports available upon request.
Installation Guidelines
- Inspect on arrival: Verify part number 6180100. Check for transit damage — reject any non-conforming component.
- Clean mating surfaces: Remove all rust, old rubber fragments, grease, and paint before installation.
- Align correctly: Follow assembly drawing orientation. Incorrect orientation may cause premature failure.
- Torque fasteners: Use calibrated torque wrench and cross-pattern tightening sequence per OEM specification.
- Post-install check: Inspect for correct seating. Run equipment at low speed to verify no abnormal noise or vibration.