Product Overview — Part 6129902
The 6129902 is a precision-manufactured Vibration Dampers component. Part 6129902 is a cab suspension spring element providing progressive load-deflection characteristics for heavy equipment operator cab systems. This component serves as a cross-reference for multiple equipment platforms where controlled vertical compliance is required to isolate the operator from machine vibration. The spring element uses a rubber compound formulated for durability under dynamic loading conditions typical of road construction and earthmoving operations. Progressive rate characteristics ensure both soft low-frequency isolation and adequate high-load support without bottoming out. For BOMAG compactor vibration damper applications, our dedicated vibration damper range includes part numbers 3115 2472 00 and 3115 1926 02 specifically designed for BOMAG BW series equipment.
Technical Specifications
| Property | Value | Standard |
|---|---|---|
| Part Number | 6129902 | OEM Specification |
| Hardness | 45–70 Shore A (application specific) | ISO 48-4 / ASTM D2240 |
| Tensile Strength | ≥ 16 MPa | ISO 37 / ASTM D412 |
| Elongation at Break | ≥ 300% | ISO 37 / ASTM D412 |
| Compression Set | ≤ 25% (22h/70°C) | ISO 815-1 / ASTM D395 |
| Temperature Range | −40°C to +90°C | Operational limits |
| Ozone Resistance | No cracking 168h | ISO 1431-1 |
| Fire Safety | EN 45545-2 HL2/HL3 available | EN 45545-2:2013 |
| Fatigue Life | > 1,000,000 cycles | Dynamic fatigue protocol |
Applications
Heavy equipment cab suspension; operator platform spring elements; progressive vibration isolation systems.
Our technical team can assess suitability for other equipment types. Contact us with the make, model, and serial number for a precise cross-reference confirmation.
Material & Quality Standards
- Base Polymer: Natural Rubber (NR) or NR/SBR blend — excellent resilience and fatigue resistance
- Reinforcing Fillers: High-structure carbon black for controlled stiffness and wear resistance
- Protection Additives: Anti-ozonant wax and chemical antioxidant for extended outdoor service life
- Bonding System: Chemically bonded rubber-to-metal interface exceeding bulk rubber strength
- EN 45545-2 Option: Halogen-free flame retardant meeting smoke toxicity requirements (on request)
Every batch produced under ISO 9001:2015 QMS with full material traceability. Certificate of Conformance and material test reports available upon request.
Installation Guidelines
- Inspect on arrival: Verify part number 6129902. Check for transit damage — reject any non-conforming component.
- Clean mating surfaces: Remove all rust, old rubber fragments, grease, and paint before installation.
- Align correctly: Follow assembly drawing orientation. Incorrect orientation may cause premature failure.
- Torque fasteners: Use calibrated torque wrench and cross-pattern tightening sequence per OEM specification.
- Post-install check: Inspect for correct seating. Run equipment at low speed to verify no abnormal noise or vibration.